Current Transformers, Nanocrystalline Cores, Shunts, Latching Relays
P/N: DT400-100B
400A/40mA, Rb=20Ω, turns ratio 1:10000
Max current 400A, accuracy 0.1 class
ID Φ27mm, OD Φ61mm, HT 32mm
High permeability composite core, good linearity over the whole current range
Compact size, plastic case with cast resin, through-hole big enough for most primary wires
P/N: XY-718B
Single phase latching relay
Size: 43.2×33.2×22mm
Max current 100/120A
Single/double coil 9~48VDC
16mm2 multi-strand wire, with Φ6mm tube
P/N: CP90-120-20A
ID=90mm, OD=120mm, H=20mm
Le: 32.97cm, Ac: 2.25cm2, Weight: 678g
AL value ≥100μH@1kHz/0.3V
High grade soft magnetic cores with high permeability
Used for high precision current transformers
P/N: SC100-20C
Resistance 200μΩ±5%, rated power 2.0W
Carry electirc current as high as 100A
Total length 41mm, width 28.8mm
3mm copper & 2mm EBW plate brazed by Ag-based solder
C shape structure, connect distance 21.8 mm, weight 20.4g
P/N: MC30-10A
5(30)A/5mA, Rb=10Ω, turns ratio 1:1000
Max current 30A, accuracy 0.1 class
Hole Φ4.9mm, height 19mm, thickness 9.5mm
2 pins (needles) with standard pitch 12.7mm
P/N: CE22-40-15A
ID=22mm, OD=40mm, H=15mm
Le: 9.73cm, Ac: 1.01cm2, Weight: 82.7g
AL value ≥153μH@1kHz/0.25V
Used for CM (common-mode) chokes in electrical circuits
Suit for frequency as high as a few hundred thousand hertz
Resistance 200μΩ±5%, rated power 2.9W
3.0mm EBW plates, brass block welded
Suitable for 120A primary current, 4 lead wires
Blind holes 2-Φ9.5mm, 4-M6, connect distance 68.2mm
Total length 64.1mm, width 80.2mm
P/N: DF40-25B
5(40)A/2mA, Rb=10Ω, turns ratio 1:2500
Max current 40A, accuracy 0.1/0.2 class
ID Φ8.5mm, OD Φ26*28.2mm, HT 17.2mm
Good protection by plastic case with epoxy resin inside
Different level of accuracy class available
P/N: CPL233-60-8-10A
Racetrack shape solid loop, easy to fix the coils
ID=241*60mm, OD=257*76mm, H=10mm
Le: 57.56cm, Ac: 0.64cm2, Weight: 330g
Exciting voltage>90 μV@50 Hz/30 mA
Suitable for transformers, inverters, power system components
Resistance 300μΩ±5%, rated power 0.3W
Max primary current 30A, weight 2.4g
EBW 1.0mm thick, length 32mm, width 10.5mm
Mounting holes 2-Φ5.2mm, distance 21.5 mm