P/N: CP40-50-20B
ID=40mm, OD=50mm, H=20mm
Le: 14.13cm, Ac: 0.75cm2, Weight: 93.5g
AL value ≥78μH@1kHz/0.3V
Wide Frequency Nanocrystalline CMC Core

P/N: CP40-50-20B
ID=40mm, OD=50mm, H=20mm
Le: 14.13cm, Ac: 0.75cm2, Weight: 93.5g
AL value ≥78μH@1kHz/0.3V
P/N: ST100-20A
Resistance 200μΩ±5%, rated power 2.0W
2.0mm manganin / copper plates, brass block welded
Suitable for 100A primary current, 3 lead wires
Mounting holes 2-Φ8.2, screw 4-M6, connect distance 69mm
Total length 80mm, width 39.5mm, weight 70g
P/N: DF40-25E
5(40)A/2mA, Rb=10Ω, turns ratio 1:2500
Max current 40A, 0.1 class, DC immune error<3%
Dual core winding protected by plastic case
ID Φ8.5mm, OD Φ26*28.2mm H 17.2mm
Dielectric strength 4kV
P/N: CP20-30-6.5A
ID=20mm, OD=30mm, H=6.5mm, weight 17.9g
Fe-based 1K107 & 1K101 tape wound
AL value ≥22μH@1kHz/0.3V/1Ts
Suit for 60A DC immune current transformer
P/N: SE80-35B
Resistance 350μΩ±5%, rated power 2.2W
Max primary current 80A, output wires 70mm
EB welded 2.0mm thick strip
Length 82mm, width 8mm, thickness 2.0mm
P/N: MW90-25A
50(90)A/20mA, Rb=10Ω/2.7Ω
0.1mm enamel wire 2500 turns
Max current 90A, 0.1 class
ID 8.6(min), OD 21.6(max), thickness 9.4(max)
Assist in custom design and provide free samples
P/N: CE10.8-17.7-8A
ID=10.8mm, OD=17.7mm, H=8mm (nominal)
Le: 4.48cm, Ac: 0.209cm2, Weight: 8g
AL value ≥70μH@10kHz/4mA
8mm 1k107 thin type ribbon wound
P/N: SN40A
Current rating 40A
Stamped from 1.0mm thick T2 copper plate
Hole size 2-Φ3.2mm, 6-Φ1.7mm, connect distance 6/10.2mm
Length 192mm, width 54mm, weight 25g
6 sampling points for PCB mounting
P/N: DT400-50A
40(400)A/8mA, Rb=27Ω, turns ratio 1:5000
Max current 400A, accuracy 0.1 class
Big through-hole, ID Φ42mm, OD Φ72mm, HT 24.5mm
P/N: CP40-50-20A
ID=40mm, OD=50mm, H=20mm, weight 95g
Nanocrystalline 1K107 & amorphous 1K101 inside
AL value ≥25μH@1kHz/0.3V/1Ts
Suit for 400A DC immune current transformer