As a professional manufacturer, we can provide electrical components listed as below. We assist in custom design for all these products and can provide samples within a couple of days.

Nanocrystalline Amorphous Core

  • High permeability and low losses at high frequencies
  • High saturated induction
  • Excellent cost effective advantage compared with similar products
  • Stable temperature character, low magnetostriction coefficient, low noise
  • Variety kinds of encapsulation, epoxy coating, plastic/steel/aluminum box
  • We accept custom design and provide free samples

Current Transformer

  • Fe-based Nanocrystalline / Amorphous / Silicon Steel Cores Inside
  • Electric energy measurement error introduced by DC Immnue CT is less than 3%
  • Accuracy 0.02/0.05/0.1/0.2 Class, low phase error, high linearity over the whole current range, safe galvanic separation, high dynamic range
  • Variety kinds of encapsulation, busbar or through-hole type, easy to fix and install
  • We produce the critical parts ourselves, accept ODM / OEM, and provide free samples
  • Meet the requirements of standard IEC 60044-3, GB17201, JB/T10665
  • Used for electrical measuring instruments, electrical protective devices, current sensing modules, and so on

Manganin Shunt Resistor

  • T2 Copper, 6J13 / 6J12 Manganin, temperature coefficient as low as 20 / 40 ppm/K;
  • High accuarcy, resistance tolerance <±3% or <±5% ;
  • Electron beam welding (EBW) or Spot welding, smooth surface, no visible welds;
  • We accept custom design and provide free samples, which are usually manufactured by wire-cut electrical discharge machining (EDM);
  • Sophisticated stamping toolings ensure the precision and stability of shunt’s resistance.
  • Meet the requirements of standard IEC 62053-21/22/23, GB6145-99 F2;
  • Used for Electrical measuring instruments, electrical protective devices, current sensing modules, automatic control system, and so on

Magnetic Latching Relay

  • Low Power Consumption, Driven by Impulse
  • High Impact Resistance, High Reliability
  • Dielectric Strength Between Contact & Coil is 4kV
  • Both Single Coil and Double Coils are available
  • Meet requirements of RoHS and ANSI C12.1 Standard
  • We accept custom design and provide free samples, accessories of CT and Shunt is an optional
  • Used for electricity meters, automatic meter reading systems, and so on.