P/N: MW30-10A
1(30)A/1mA, Rb≤100Ω
0.1mm wire 1000 turns
Max current 30A, 0.5 class
ID 6.6mm, OD 14.5mm(max), height 6.5mm
Current Transformer Winding Coil
Low Phase Error Current Transformer
P/N: MS12-10A
10(12)A/10mA, Rb=20Ω, turns ratio 1:1000
Primary current 0.05~12A, secondary current 0.05~12mA
Phase angle error <2' (at 10% rated current)
Insulation tape & heat-shrink sleeve double protected
ID Φ13mm, OD Φ30mm, H 17mm, lead wires shielded
3-Pin Mini Current Transformer
P/N: MC50-10A
50A/50mA, Rb=100Ω
3 Pins Φ1.0mm, Pitch=15.24mm
Through-hole=Φ9.5mm, bottom area 23.8*11.12mm
2 pins for connecting, 1 pin for mechanical support
Front 2-Pin Tiny Current Transformer
P/N: MC10-10B
5(10)A/5mA, Rb=50Ω, turns ratio 1:1000
2 Pins Φ0.8mm, Pitch=12.8mm
Through-hole=Φ4mm, bottom area 9.7*17mm
Ring Type Micro Current Transformer
P/N: MS100-10A
10(100)A/10mA, Rb=12.5Ω, turns ratio 1:1000
Max current 100A, accuracy 0.1 class
Insulation tape & heat-shrink sleeve double protected
ID Φ9mm, OD Φ29mm, H 16.5mm
Custom PCB Mount Current Transformer
P/N: MC80-10A
10(80)A/10mA, Rb=10Ω, turns ratio 1:1000
Max current 80A, accuracy 0.1 class
High permeability nanocrystalline core inside
Hole Φ8mm, height 31mm, thickness 19mm
4 pins with pitch 20*9mm
PCB Mount Through-hole Current Transformer
P/N: MC10-10E
5(10)A/5mA, Rb=50Ω, turns ratio 1:1000
Max current 10A, accuracy 0.2 class
Hole Φ5mm, primary wire can be easily put through
Pitch 12.7mm, height 16.6mm, mounting area 16.6*9.2mm
2-Pin PCB Mount Current Transformer
P/N: MC30-10A
5(30)A/5mA, Rb=10Ω, turns ratio 1:1000
Max current 30A, accuracy 0.1 class
Hole Φ4.9mm, height 19mm, thickness 9.5mm
2 pins (needles) with standard pitch 12.7mm
Energy Meter Current Transformer
P/N: MT100-10B
10(100)A/10mA, Rb=12.5Ω, turns ratio 1:1000
Max current 100A, accuracy 0.1 class
Winding coil protected by PBT case
ID Φ10mm, OD Φ28mm, HT 17mm
Bus-bar Mini Current Transformer
P/N: MSB100-10A
5(100)A/5mA, Rb=10Ω, turns ratio 1:1000
Max current 100A, accuracy 0.1 class
Winding double insulated, OD Φ28mm
Mounting holes 2-Φ7.4mm, distance 32.5mm