P/N: SE60-18A
Resistance 175μΩ±5%, rated power 0.6W
Max current 60A, EBW plate 1.2mm thick
Width 32mm, Height 12.9mm, weight 4g
Mounting holes 2-Φ6.2mm, distance 21 mm
Micro Ohm Manganin Shunt

P/N: SE60-18A
Resistance 175μΩ±5%, rated power 0.6W
Max current 60A, EBW plate 1.2mm thick
Width 32mm, Height 12.9mm, weight 4g
Mounting holes 2-Φ6.2mm, distance 21 mm
P/N: SE100-12B
Resistance 120μΩ±5%, rated power 1.2W
EB welded 3.0mm thick copper & 2.0mm manganin strip
Max current 100A, width 33mm, weight 16g
Mounting holes 2-Φ5.3mm, distance 21mm
100% tested by high precision micro ohm meters
P/N: MSB100-10A
5(100)A/5mA, Rb=10Ω, turns ratio 1:1000
Max current 100A, accuracy 0.1 class
Winding double insulated, OD Φ28mm
Mounting holes 2-Φ7.4mm, distance 32.5mm
P/N: MT100-10B
10(100)A/10mA, Rb=12.5Ω, turns ratio 1:1000
Max current 100A, accuracy 0.1 class
Winding coil protected by PBT case
ID Φ10mm, OD Φ28mm, HT 17mm
P/N: CP19-27-8A
ID=19mm, OD=27mm, H=8mm, weight 15.2g
High permeability Fe-based nanocrystalline 1K107
Amorphouse 1K101 of high saturation induction
AL value ≥24μH@1kHz/0.3V/1Ts
Suit for 100A DC immune current transformer
P/N: SC100-15A
Resistance 150μΩ±5%, rated power 1.5W
Max current 100A, weight 15.1g
2.0mm manganin & 1.5mm copper brazed
Connect distance 57 mm, 10mm wide copper lugs
P/N: ST100-20A
Resistance 200μΩ±5%, rated power 2.0W
2.0mm manganin / copper plates, brass block welded
Suitable for 100A primary current, 3 lead wires
Mounting holes 2-Φ8.2, screw 4-M6, connect distance 69mm
Total length 80mm, width 39.5mm, weight 70g
P/N: MS100-10A
10(100)A/10mA, Rb=12.5Ω, turns ratio 1:1000
Max current 100A, accuracy 0.1 class
Insulation tape & heat-shrink sleeve double protected
ID Φ9mm, OD Φ29mm, H 16.5mm
Simple structure, winding coil wrapped by insulation tape;
P/N: MS100-10B, 5(100)A/5mA
Accuracy 0.2 Class, Rb=10Ω
Big through-hole, ID=Φ20mm, OD=Φ37mm, H=16mm
P/N: MSB100-10B
Current rating 100A, double insulation
Accuracy 0.1 class with turns ratio 1:1000
Busbar built-in structure with nickel plating
Primary connect distance 21.9mm, OD Φ27mm