Current Transformers, Nanocrystalline Cores, Shunts, Latching Relays
P/N: ZT2-42A, Zero phase CT;
Output > 4.2VAC when input 2A & 1turn with load 1kΩ;
Various output voltage range specified by customer;
Winding of CRGO core for max current 10A;
Hole=Φ11.5mm(Min), OD=Φ31.5mm(Max), H=21.5mm(Max);
PBT plastic case filled with epoxy resin
P/N: MS12-10A
10(12)A/10mA, Rb=20Ω, turns ratio 1:1000
Primary current 0.05~12A, secondary current 0.05~12mA
Phase angle error <2' (at 10% rated current)
Insulation tape & heat-shrink sleeve double protected
ID Φ13mm, OD Φ30mm, H 17mm, lead wires shielded
P/N: MEB10-15A
1(10)A/4mA, Rb=70Ω, turns ratio 1:1500
Max current 80A, accuracy 0.1 class
Busbar holes 2-Φ5.6*7mm, distance 19.8mm
OD 32mm, Length 32mm
Secondary winding is led out by multi-soft wires
P/N: MC15-5A
15A/30mA, turns ratio 1:500
Typical load 500Ω (max.)
2 Pins Φ0.8mm, Pitch=12.7mm
Through-hole Φ5mm, bottom area 17*8.9mm
Isolating current feed-back signal in switch mode power supplies
P/N: MC10-10B
5(10)A/5mA, Rb=50Ω, turns ratio 1:1000
2 Pins Φ0.8mm, Pitch=12.8mm
Through-hole=Φ4mm, bottom area 9.7*17mm
P/N: MC10-10E
5(10)A/5mA, Rb=50Ω, turns ratio 1:1000
Max current 10A, accuracy 0.2 class
Hole Φ5mm, primary wire can be easily put through
Pitch 12.7mm, height 16.6mm, mounting area 16.6*9.2mm
P/N: MC15-10A, MC15-10B;
2-Pin PCB mount current transformer;
Max. current: 15A/20A, Turns ratio=1:1000;
Hole=Φ5mm; Pitch: 11.8mm, 12.7mm;
Mounting area: 18.2*10.2mm, 17*8.9mm