Current Transformers, Nanocrystalline Cores, Shunts, Latching Relays
P/N: CP16-25-10A
ID=16mm, OD=25mm, H=10mm, weight 21.5g
High linearity over the whole range of primary current
Small remanence and coercivity, low iron loss (hysteresis loss)
AL value ≥35μH@1kHz/0.3V/1Ts
Suit for 120A DC immune current transformer
P/N: SC150-8C;
Resistance 80μΩ±5%, rated power 1.8W;
Carry electirc current as high as 150A;
Total length 69mm, width 18mm, height 64mm;
3mm thick copper & manganin brazed by Ag-based solder;
Connect distance 59.2 mm, copper lugs with grooves
P/N: DPB120-25B
10(120)A/4mA, Rb=10Ω, turns ratio 1:2500
Max current 120A, 0.1 class, DC immune error<3%
Mounting holes 2-Φ6.5mm, distance 18mm
P/N: DF120-25A
15(120)A/6mA, Rb=10Ω, turns ratio 1:2500
Max current 120A, 0.1 class, DC immune error<3%
Dual core winding protected by plastic case, dielectric strength 4kV
ID Φ13mm, OD Φ37.5*38.7mm H 14mm
Suit for smart meters, and other measuring devices
Insulation tape sealed toroidal coil
P/N: MS120-20B, 10(120)A/5mA
Accuracy 0.1 Class, Rb=5Ω
Big through-hole, ID=Φ20mm, OD=Φ37mm, H=16mm
P/N: DS120-30A
15(120)A/5mA, Rb=10Ω, turns ratio 1:3000
Max current 120A, 0.1 class, DC immune error<3%
Dual core winding coil double insulated
ID Φ9mm, OD Φ31mm, H 18mm
Used for energy precision measurement
P/N: DF120-25B
15(120)A/6mA, Rb=17.8Ω, turns ratio 1:2500
Max current 120A, 0.1 class, DC immune error<3%
Holes Φ13mm, height 38.7mm, width 37.5mm
Parallel lead wire 1500mm
P/N: PL120-20B
120A/60mA, accuracy class 0.2%
Turns ratio 1:2000, silicon steel core
Φ23 mm open-close hole for primary cable
Hanging structure, M4×6 for mounting
2000mm shielding lead wire
P/N: DC120-25A;
60(120)A/24mA, Rb=10Ω, turns ratio 1:2500
Max current 120A, 0.1 class, DC immune error<3%
Holes Φ13mm, height 39mm
4-pin plastic box with epoxy resin vacuum potting
Pitch 25/32.5mm, mounting area 38*14.2mm
P/N: DSB120-25A
10(120)A/4mA, Rb=10Ω, turns ratio 1:2500
Max current 120A, 0.1 class, DC immune error<3%
Mounting holes 2-Φ6.2mm, distance 20mm