P/N: MT400-50A
40(400)A/8mA, Rb=10Ω, turns ratio 1:5000
Max current 400A, accuracy 0.1 class
ID=Φ23mm, OD=Φ59.5mm, H=21.4mm
PBT plastic case with epoxy resin filled inside
Used for heavy current measurement
Plastic Case Mini Current Transformer
Electrical Instrument Current Transformer
P/N: DT400-250B
400A/16mA, Rb=20Ω, turns ratio 1:25000
Max current 400A, 0.1 class, DC immune error<3%
Dual core winding plastic case protected
ID Φ27mm, OD Φ61mm, H 32mm
Output lead wire double insulated
DC Immune Precision Current Transformer
High precision, heavy primary current
Insulation tape sealed toroidal coil
P/N: DS200-50A, 20(200)A/4mA
Accuracy 0.1 Class, Rb=20Ω
Big through-hole, ID=Φ41mm, OD=Φ68mm, H=22mm
Ring Type DC Immune Current Transformer
P/N: DT200-50A
20(200)A/4mA, Rb=20Ω, turns ratio 1:5000
Mac current 200A, accuracy 0.1 Class
ID Φ42mm, OD Φ72mm, H 24.5mm
Open-Close Current Transformer
P/N: PL400-100B
Self-locked structure for reliable hanging
Turns ratio 1:10000 for 40mA output
High linearity over a wide current range
Max current 400A, Φ36 mm hole for primary cable
Rectangular Split Current Transformer
P/N: PL800-500A
800A/16mA, turns ratio 1:50000, silicon steel core
62×42 mm open-close hole for primary cable
Hanging structure, M6×4 for mounting
3000mm shielding lead wire
Big Hole 2-Pin Current Transformer
P/N: MC250-20A
250A/125mA, Rb=10Ω
2 Pins Φ0.8mm, Pitch=20mm
Through-hole=Φ12mm, bottom area 43.6*20mm
4-Φ4mm holes for mounting, distance 37*15mm
Round Core Current Transformer
P/N: DT400-50A
40(400)A/8mA, Rb=27Ω, turns ratio 1:5000
Max current 400A, accuracy 0.1 class
Big through-hole, ID Φ42mm, OD Φ72mm, HT 24.5mm
High Current DC Immune Core
P/N: CP40-50-20A
ID=40mm, OD=50mm, H=20mm, weight 95g
Nanocrystalline 1K107 & amorphous 1K101 inside
AL value ≥25μH@1kHz/0.3V/1Ts
Suit for 400A DC immune current transformer
Electric Current Measure Manganin Shunt
P/N: SE300-30A
Resistance 300μΩ±5%, rated power 27W
Max current 300A, EBW plate 3.0mm thick
Heavy current shunt resistor for AC/DC measurement circuit
Width 85mm, Height 18mm, weight 39.8g
Mounting holes 2-Φ7mm, distance 60 mm