Current Transformers, Nanocrystalline Cores, Shunts, Latching Relays
P/N: DM60-25B
5(60)A/2mA, Rb=10Ω, turns ratio 1:2500
Max current 60A, 0.1 class, DC immune error<3%
Dual core winding coil filled by epoxy resin
Metal shield & plastic case double protected
ID Φ8.5mm, OD Φ36mm, H 23mm
P/N: MS60-25A
5(60)A/2mA, Rb=10Ω, turns ratio 1:2500
Max current 60A, accuracy 0.1 class
Insulation tape & heat-shrink sleeve double protected
ID Φ10.5mm, OD Φ31mm, H 14.5mm
Phase shift error <5' (at 20% rated current)
P/N: DT60-25A, 5(60)A/2mA;
Accuracy 0.1 Class, Rb=10Ω;
Hole: Φ8.2, OD: Φ30.5, H: 18.5;
Plastic case with epoxy resin filled inside;
Through-hole of Φ8.2 mm for primary wire
P/N: DPB60-25A
5(60)A/2mA, Rb=10Ω, turns ratio 1:2500
Max current 60A, 0.1 class, DC immune error<3%
Mounting holes 2-Φ5.3mm, distance 16mm
P/N: DMB60-25E
5(60)A/2mA, Rb=10Ω, turns ratio 1:2500
Max current 60A, 0.1 class, DC immune error<3%
Work properly under magnetic field
Mounting holes 2-Φ5.2mm, distance 16.8mm
Width 30mm, length 31mm, height 33mm
P/N: CP20-30-6.5A
ID=20mm, OD=30mm, H=6.5mm, weight 17.9g
Fe-based 1K107 & 1K101 tape wound
AL value ≥22μH@1kHz/0.3V/1Ts
Suit for 60A DC immune current transformer
P/N: SP60-24B;
Resistance 240μΩ±5%, 0.9W, 1.6mm thick EBW plate & copper lugs;
Neutral wire 6 mm2, fiber glass tube & heat-shrink sleeves insulated;
Suitable for 60A primary current, 3 lead wires twisted;
Mounting holes 2-Φ4.2, connect distance 137mm;
Total length 145±5mm, weight 14.9g
P/N: CP14-20-10A
ID=14mm, OD=20mm, H=10mm, weight 11.5g
Nanocrystalline & amorphous soft magnetic material inside
Very low temperature drift, easy to compensate
AL value ≥27μH@1kHz/0.3V/1Ts
Suit for 60A DC immune current transformer
P/N: SE60-25B;
Resistance 250μΩ±5%, rated power 0.9W, weight 5.4g
Stamped from 1.5mm EBW strip, length 31mm
Mounting holes Φ5.2mm & Φ5.2*6.2mm (oval hole)
Adjustable connect distance 21±0.5mm
Key component for battery management of cordless tools
P/N: CP17-22-10A
ID=17mm, OD=22mm, H=10mm, weight 12.7g
Fe-based 1K107 & 1K101 tape wound
AL value ≥22μH@1kHz/0.3V/1Ts
Annealing furnace with/without magnetic field
Suit for 60A DC immune current transformer