CE20-25-25A
ID=20mm, OD=25mm, H=25mm
Le: 7.07cm, Ac: 0.469cm2, Weight: 26.8g
AL value ≥48μH@1kHz/0.25V
Wound by very thin tape (spraying strip)
Suit for direct coil winding of current transformer
Nanocrystalline Ribbon Wound Core
High Permeability Common Mode Choke Core
P/N: CP20-32-10A
ID=20mm, OD=32mm, H=10mm (nominal)
Le: 8.164cm, Ac: 0.45cm2, Weight: 31.8g
AL value ≥26.5μH@16kHz/1V
Permeability ≥80000 @ 1kHz, low iron loss
Low price & high saturation induction than permalloy cores
Customized Nanocrystalline CM Choke Core
P/N: CE22-40-15A
ID=22mm, OD=40mm, H=15mm
Le: 9.73cm, Ac: 1.01cm2, Weight: 82.7g
AL value ≥153μH@1kHz/0.25V
Used for CM (common-mode) chokes in electrical circuits
Suit for frequency as high as a few hundred thousand hertz
Good Temperature Stability Nanocrystalline Core
P/N: CP19-26-10A
ID=19mm, OD=26mm, H=10mm (nominal)
Le: 7.07cm, Ac: 0.26cm2, Weight: 16.8g
AL value ≥54μH@1kHz/0.3V
Suit for 120A mini current transformer
Plastic Box Nanocrystalline Choke Core
P/N: CP16-26-10A
ID=16mm, OD=26mm, H=10mm (nominal)
Le: 6.59cm, Ac: 0.38cm2, Weight: 15g
AL value ≥26.5μH@16kHz/1V
10mm 1k107 ribbon wound, fixed by silicon grease after annealing
Good mechanical protection by PBT box with separator
PCB Mount Nanocrystalline CM Choke Core
P/N: CP20-32-10B
ID=20mm, OD=32mm, H=10mm (bare core)
Le: 8.16cm, Ac: 0.45cm2, Weight: 29.9g
AL value ≥26.5μH@16kHz/1V
10mm 1k107 tape wound core fixed by silicon grease after annealing
Good mechanical protection by PBT box with rib & base